Rivian R1S — Track Package PPF

Project Overview

This project documents a Track Package paint protection film (PPF) installation on a Rivian R1S performed at ArtDeShine Studios. The Rivian R1S is a full-size electric adventure vehicle with a broad, upright front end and extensive lower-body surfacing — geometry that places a large amount of painted area in the path of road debris, grit, and environmental exposure. The Track Package was selected to address the panels most vulnerable to impact damage while preserving the vehicle's factory appearance with a transparent, self-healing film.

Why the Track Package Was Chosen

The Track Package occupies a middle ground between partial front coverage and full-vehicle protection. For a vehicle of the R1S's scale and use profile, the decision to choose this package was driven by several measurable factors:

• Front-end exposure: The R1S presents a wide, tall front fascia and full hood surface that face regular road debris on both highway and secondary-road driving.
• Rocker and lower-panel exposure: The vehicle's ride height and lower-body design channel grit and stone spray along the rocker panels and lower doors.
• Preservation priorities: The owner's goal was to protect the highest-impact painted areas without the commitment of full-vehicle film coverage.
• Budget and coverage balance: The Track Package extends protection beyond the front-end to include side and lower panels, offering broader coverage at a moderate investment relative to a full-vehicle package.

This coverage approach is project-focused: it reflects the specific exposure profile of this vehicle and the protection priorities for this installation rather than assumptions about any particular driving pattern.

Areas Protected

The Track Package, as defined by ArtDeShine Studios' governed coverage architecture, protects the following forward-facing and high-impact exterior panels:

• Front bumper
• Full hood
• Full front fenders
• Headlights
• Forward-facing mirror caps
• A-pillars and front roof edge
• Rocker panels and side skirts
• Lower doors
• Rear wheel arches

This coverage extends film protection from the front-end panels — which receive the most direct debris impact — along the lower body and side surfaces that are exposed to grit and spray kicked up by the front wheels. The result is a broader zone of protection focused on the areas most likely to sustain stone chips and surface marring during regular road use.

Installation Approach

The film was installed panel by panel in a controlled studio environment. The installation process followed ArtDeShine Studios' standard approach for PPF work:

• Surface preparation: Each panel was cleaned, decontaminated, and inspected to ensure the paint surface was free of particles that could be trapped beneath the film.
• Film positioning: Pre-cut film patterns were positioned on each panel, aligned to the vehicle's body lines and panel edges.
• Panel fitment: The film was carefully laid down and squeegeed to conform to the contours of each surface, working around compound curves and body-line transitions.
• Edge alignment: Film edges were wrapped or terminated at panel edges to minimize visibility and reduce the risk of lifting over time.

The installation was performed with attention to the R1S's specific body geometry, including the broad hood surface, upright front fascia, and contoured rocker panels. No specific installation time, film thickness, or warranty duration is represented for this project record.

Finished Result

The completed installation preserves the Rivian R1S's factory appearance with a transparent film finish that integrates with the original paint. The protected areas maintain their original color and gloss, with the film providing a barrier against stone chips, surface marring, and environmental wear on the covered panels. The Track Package's coverage focuses protection on the high-impact areas most exposed to road debris while leaving upper-body and rear panels uncovered — a deliberate balance between protection scope and coverage cost. The result is intended to help preserve the vehicle's exterior condition over time, not to guarantee perfection or eliminate all risk of damage.

Choosing PPF Coverage for a Rivian R1S

Paint protection film coverage for a Rivian R1S depends on several factors specific to each owner and vehicle:

• Road exposure and typical driving environment
• Vehicle use and preservation goals
• Desired protection area — front-end only, track/high-impact, or full vehicle
• Budget and coverage priorities

The Track Package represented on this project is one of several coverage options available. Owners evaluating PPF coverage for their own R1S can learn more about the decision factors and package differences in our guide to choosing PPF coverage and our complete guide to paint protection film. For an overview of the PPF service itself, including the full range of available packages, visit our paint protection film service page.